Specifications

IPmux-8/16 Ver. 6.00 Front Panel Controls, Connectors, and Indicators 3-1
Chapter 3
Operation
This chapter:
• Provides a detailed description of the front panel controls and indicators
• Explains power-on and power-off procedures
• Provides instructions for using a terminal connected to the IPmux-8/16 control
port
• Describes how to navigate menus
• Illustrates management menus.
For a detailed explanation of parameters of the menus, see Chapter 4.
3.1 Turning IPmux-8/16 On
IPmux-16 power switches are located on the back panel of the unit.
IPmux-8 does not have a power switch. The unit turns on automatically upon
connection to the mains.
 To turn on IPmux-8:
• Connect the power cord to the mains.
The PWR indicator ligzhts up and remains lit as long as IPmux-8/16
receives power.
 To turn on IPmux-16:
• Set the PS1 and/or PS2 power supply switch(es), located on the rear panel, to
ON.
3.2 Front Panel Controls, Connectors, and Indicators
IPmux-8
The IPmux-8 LEDs are located on the left side of the front panel. Interface
modules installed in IPmux-8 have their own LED indicators (see
Figure 3-1 and
Figure 3-2).