Specifications
Chapter 2 Installation and Setup Installation and Operation Manual
2-6 Connecting to the Management Stations IPmux-8/16 Ver. 6.00
PS1
~100 -24 0VAC 3A T 125V
POWER
O
I
~100-240VAC 3A T 125V
POWER
O
I
PS2PS1
CH1
CH5
CH2
CH6
CH3
CH7
CH4
CH8
CH1
CH5
CH2
CH6
CH3
CH7
CH4
CH8
8E1 8E1
1 1
5 5
3 3
7 7
2 2
6 6
SYNC SYNC
4 4
8 8
ETH/SFP
ACTACT ACTLINKLINK LI NK1324
ETH/UTP/4
ACT ACTACT ACTLINK LINKLI NK LINK1324
Figure 2-6. Fiber Optic Network Connector (4-Port Ethernet Module)
To connect to the Ethernet network equipment with a copper interface:
• Connect IPmux-8/16 to the Ethernet network equipment using a standard
straight UTP cable terminated with an RJ-45 connector.
PS2
PS2
PS1
POWER
OI
~100 -24 0VAC 3A T 125V
CH1 CH2 CH3 CH4
1
3
2
SYNC
4
CH1
PORT 1 PORT 1
CH2 CH3 CH4
1
3
2
SYNC
LINK LINK
ACT ACT
4
4T14T1
LAN-UTP LAN-UTP
Figure 2-7. Electrical Connector (1-Port Ethernet Modules)
2.7 Connecting to the External Clock Source
IPmux-16 is connected to the external clock source via a balanced RJ-45
connector designated EXT. CLK. Refer to Appendix A for the connector pinout.
PS1
~100 -24 0VAC 3A T 125V
POWER
O
I
~100-240VAC 3A T 125V
POWER
O
I
PS2PS1
CH1
CH5
CH2
CH6
CH3
CH7
CH4
CH8
T3 8E1
1
5
3
7
2
6
SYNC
SYNC
4
8
ETH/UTP/4
ACT ACTACT ACTLINK LI NKLINK LINK1324
ETH/UTP/4
ACT ACTACT ACTLINK LI NKLI NK LI NK1324
TX RX
Figure 2-8. EXT. CLK Connector
To connect to the external clock source:
• Connect IPmux-16 to the external E1 or T1 clock source using an appropriate
cable.
2.8 Connecting to the Management Stations
IPmux-16 can be connected to a local ASCII terminal via CONTROL DTE port or
to remote network management station via a dedicated CONTROL ETH port.
IPmux-8 does not include a dedicated Ethernet management port.
Connecting to the ASCII Terminal
IPmux-8/16 is connected to an ASCII terminal via a 9-pin D-type male connector
designated CONTROL DTE. A CBL-DB9/DB9/NULL cross cable is supplied with
the unit for the ASCII terminal connection. Appendix A lists the control connector
pinout and the cross cable wiring.