Specifications

Chapter 2 Installation and Setup Installation and Operation Manual
2-4 Connecting to the Ethernet Equipment IPmux-8/16 Ver. 6.00
PS1
~100 -24 0VAC 3A T 125V
POWER
O
I
~100-240VAC 3A T 125V
POWER
O
I
PS2PS1
CH1
CH5
CH2
CH6
CH3
CH7
CH4
CH8
CH1
CH5
CH2
CH6
CH3
CH7
CH4
CH8
8E1 8E1
1 1
5 5
3 3
7 7
2 2
6 6
SYNC SYNC
4 4
8 8
ETH/UTP/4
ACT ACTACT ACTLINK LINKLINK LI NK1324
ETH/UTP/4
ACT ACTACT ACTLINK LI NKLI NK LI NK1324
Figure 2-3. E1/T1 Connectors (8-Port Modules)
 To connect to the E1/T1 devices with balanced interfaces:
• Connect IPmux-8/16 to the E1/T1 devices using standard straight E1/T1 cables.
 To connect to the E1 devices with unbalanced interfaces:
1. Connect the RJ-45 connector of the CBL-RJ45/2BNC adapter cable to the
IPmux-8/16 balanced RJ-45 ports.
2. Connect the transmit cable to the red coaxial connector of the adapter cable
marked ↑.
3. Connect the receive cable to the green coaxial connector of the adapter cable
marked ↓.
Connecting to the E3, T3, CT3 Devices
E3, T3 and channelized CT3 devices are connected to IPmux-16 via unbalanced
BNC ports designated E3, T3, CT3.
PS1
~100 -24 0VAC 3A T 125V
POWER
O
I
~100-240VAC 3A T 125V
POWER
O
I
PS2PS1
CH1
CH5
CH2
CH6
CH3
CH7
CH4
CH8
T3 8E1
1
5
3
7
2
6
SYNC
SYNC
4
8
ETH/UTP/4
ACT ACTACT ACTLINK LI NKLINK LINK1324
ETH/UTP/4
ACT ACTACT ACTLINK LI NKLI NK LI NK1324
TX RX
Figure 2-4. T3 Connectors
 To connect to the E3, T3, CT3 devices:
1. Connect the receive line of the 75Ω coaxial cable to the BNC connector
labeled RX.
2. Connect the transmit line of the 75Ω coaxial cable to the BNC connector
labeled TX.
2.6 Connecting to the Ethernet Equipment
IPmux-8/16 is connected to the Ethernet network equipment via the fiber optic LC
connector (SFF-based for 1-port or SFP-based for 4-port Ethernet modules) or
8-pin RJ-45 electrical connector.
Connection to the Ethernet user equipment is made via LC fiber optic connector
(available for port 2 only) or 8-pin RJ-45 electrical connectors on the 4-port
Ethernet modules. Refer to Appendix A for the RJ-45 connector pinout.