Specifications

Chapter 2 Installation and Setup Installation and Operation Manual

2-2 Rear Panel Schematics and Module Combinations IPmux-8/16 Ver. 6.00

2.2 Site Requirements and Prerequisites

IPmux-8/16 is designed for installation as a desktop unit. The RM-ACE-202 or

RM-27 rack mount kits, for installation of IPmux-8/16 in a 19-inch rack, are

supplied with the units.

AC-powered IPmux-8/16 units should be installed within 1.5m (5 feet) of an

easily-accessible grounded AC outlet capable of furnishing the required supply

voltage, in the range of 100 to 230 VAC.

DC-powered IPmux-8/16 units require a -48 VDC power source, which must be

adequately isolated from the mains supply.

Allow at least 90 cm (36 inches) of frontal clearance for operator access. Allow at

least 10 cm (4 inches) clearance at the rear of the unit for cable connections. Make

sure that the ventilation holes are not blocked.

The ambient operating temperature of IPmux-8/16 is 0° C to 50° C (32° F to

122°F), at a relative humidity of up to 90%, non-condensing.

2.3 Package Contents

The IPmux-8/16 package contains the following items:

• IPmux-8/16 unit

• CBL-RJ45/2BNC adapter cable for unbalanced E1 interface

• Power cord for each ordered power supply

• Matching SFP transceiver for 4-port Ethernet module (if ordered)

• CBL-DB9/DB9/NULL cross cable that connects the IPmux-8/16 control port

and an ASCII terminal (DTE) for local management.

• RM-ACE-202 kit for IPmux-8 and RM-27 kit for IPmux-16, containing

hardware for mounting on unit in a 19-inch rack.

2.4 Rear Panel Schematics and Module Combinations

Figure 2-1 and Figure 2-2 illustrate construction of the IPmux-8 and IPmux-16 rear

panels, respectively.

PS2

PS1

POWER

~100 -24 0VAC 3A T 125V

Slot 3

Slot 1

Slot 4

Slot 2

Figure 2-1. IPmux-8 Rear Panel Schematics