Specifications

Chapter 6 Troubleshooting and Diagnostics Installation and Operation Manual
6-2 Monitoring IPmux-8/16 Performance IPmux-8/16 Ver. 6.00
4. From the Physical Port Statistics menu, select Port and enter the number of the
LAN port, which statistics you intend to display (1 for 1-port Ethernet modules,
1–4 for 4-port Ethernet modules).
5. Type R to reset the Ethernet counters.
PHYSICAL PORT STATISTICS
ETHERNET UTP
Mac Address 00-20-D2-20-98-24
Mode full duplex
Rate(Mbps) 100
Status Connected
Active Link Redundancy Not Configured
Frames received from the user
Correct frames: 287709257
Correct Octets: 2424794390
Alignment Err: 0
FCS Errors: 0
Frames transmitted to the user
Correct frames: 289609257
Correct Octets: 2616784790
Sngl Collision: 0
Mlty Collision: 0
Deferred transm: 0
Late Collision: 0
Carrier Sense: 0
-----------------------------------------------------------------------------
Slot - 1 1.Port - 1
ESC. Exit R. Reset Counters
Figure 6-1. Physical Port Statistics (1-Port Ethernet Module)
PHYSICAL PORT STATISTICS
ETH SWITCH UTP
Mac Address 00-20-D2-21-D5-B0
Mode half duplex
Rate(Mbps) 10
Status Not connected
Active LAN Redundancy Not Configured
Frames received from the user
Total frames: 0
Total Octets: 0
Oversize frames: 0
Fragments: 0
Frames transmitted to the user
Jabber: 0
Dropped frames: 0
CRC errors: 0
Correct frames: 0
Correct Octets: 0
Collision: 0
-----------------------------------------------------------------------------
Slot - 1 1.Port - 1
ESC. Exit R. Reset Counters
Figure 6-2. Physical Port Statistics (4-Port Ethernet Module)