Specifications

Chapter 5 Configuring for a Typical Application Installation and Operation Manual
5-4 Configuring IPmux-16 IPmux-8/16 Ver. 6.00
Configuring Bundles

To assign timeslots to a bundle:
1. Display the Connection menu (Configuration > Connection), and assign a
number to a bundle.
2. Display the DS0 Bundle Configuration menu (Configuration > Connection >
DS0 bundle configuration), and assign timeslots 1 to 10 to the current
bundle.

To connect IPmux-11 bundles:
1. Display the Bundle Connection Configuration menu (Configuration >
Connection > Bundle connection configuration) and configure the following
parameters:
 Destination IP Address – IP address of the IPmux-16 Ethernet 1/2 host,
13.13.13.13 for IPmux-11 (A) and 14.14.14.14 for IPmux-11 (B)
 Next Hop – IP address of the next hop router (if the destination IP address
is not in the same subnet as this IPmux)
 Destination Bundle – 1 for IPmux-11 (A) and 2 for IPmux-11 (B).
2. Leave all other parameters with their default values.
3. Save the changes.
5.3 Configuring IPmux-16
Configuring the IP Parameters

To configure the host IP parameters:
1. Display the Host IP menu (Configuration > General Configuration >
Management Configuration > Host Configuration), and assign the following
IP addresses to the hosts:
 12.12.12.12 for out-of-band management host
 13.13.13.13 for Ethernet 1 host
 14.14.14.14 for Ethernet 2 host.
2. Save the changes.

To configure the manager list:
1. Display the Manager List menu (Configuration > General Configuration >
Management Configuration > Manager List), and enter IP parameters for the
network manager station.
2. Save the changes.