Specifications

Chapter 4 Configuration Installation and Operation Manual
4-34 Additional Tasks IPmux-8/16 Ver. 6.00
Software Versions Hardware Version Inventory No.
Boot: 2.5 2-8-2004 11:18 0.2-G/1.1-A 247512
Application: 6.00D1 6-17-2004 14:21
Backup: 4.00 11-26-2003 11:26
Modules Description Version Inventory No.
Network ETH SWITCH UTP HW:0.0 SW: boot: 35771824
Network ETHERNET UTP HW:6.0 SW:1.3 248535
User STS1 HW:0.0 35743253
User 8E1 Balanced HW:3.0 141090
Optional Version Status
Clock unit HW:0.0 T1 dsx-1 O.K.
Peripherals devices Present Status
Power supply1 Present O.K.
Power supply2 Not present N/A
Fan1 Present O.K.
Fan2 Present O.K.
Press ESC to exit.
Figure 4-21. General Information Screen
Displaying Configuration Summary
IPmux-8/16 allows you to display configuration summary for all defined bundles.
Path: Main > Configuration > Configuration Summary.

To define bundle configuration summary:
• Follow the path above to display the bundle configuration summary.
Configuration summary display includes the following information:
 Bundle – Number of defined bundle
 Dst – Number of the destination bundle
 Dst IP.Next Hop – Destination IP address
 TDM/Jitter – TDM bytes in frame and jitter buffer depth values
 Assigned TS – Timeslots assigned to the bundle
 Usage – Uplink bandwidth used by the bundle.
Setting Date and Time
You can set the time for the IPmux-8/16 internal real-time clock.
Path: Main > Configuration > General Configuration > Time/Date Update.

To set date and time:
1. Follow the path above to display the Time/Date Update menu (
Figure 4-22).
2. From the Date/Time Update menu, select Set Time, and enter the current
time in the hh:mm:ss format.
3. Select Set Date, and enter the current date in the yyyy-mm-dd format.