Specifications

Installation and Operation Manual Chapter 4 Configuration
IPmux-8/16 Ver. 6.00 Additional Tasks 4-33
REDUNDANCY CONFIGURATION
1. Redundancy Disable
2. Recovery No
3. Default LAN Ethernet 1
4. Wait to Restore 30 sec.
5. Enforced LAN No Enforcement
ESC. Exit
Active LAN: Redundancy Not Configured
Last flip caused by: No flip occurred
Select item from the menu.
Figure 4-20. Redundancy Configuration Menu
4.3 Additional Tasks
This section describes additional operations supported by the IPmux-8/16
management software:
• Displaying the IPmux-8/16 general information
• Displaying the bundle configuration summary
• Setting date and time of the IPmux-8/16 internal real-time clock
• Managing files stored in the flash memory
• Assigning name to the device and defining its location
• Transferring software and configuration files
• Resetting the unit.
Displaying the IPmux-8/16 General Information
The IPmux-8/16 General Information screen displays information on current boot,
application and backup software versions, as well as the hardware revision of the
unit. It also lists all available network and user interfaces of the units along with
their software and hardware versions. Power supplies and fan units installed in the
chassis are also listed.
Path: Main > System > General Information.

To display the IPmux-8/16 inventory:
1. From the Main menu, select System.
2. From the System menu, select General Information.
The General Information screen appears (see
Figure 4-21).