Specifications

Installation and Operation Manual Chapter 4 Configuration
IPmux-24 Ver. 1.5 Configuring IPmux-24 for Management 4-15
IPmux-24
Configuration>System>Management>Management Access
1. User Access >
2. TELNET/SSH access > (Enable)
3. SNMP access > (Disable)
4. WEB access > (Enable)
5. RADIUS Authentication > (Enable Remote)
6. RADIUS Parameters >
>
ESC-prev.menu; !-main menu; &-exit 1 Mngr/s
Figure 4-15. Management Access Menu
Configuring RADIUS Client
The RADIUS (Remote Authentication Dial-In User Service) is a client/server
security protocol. Security information is stored in a central location, known as
the RADIUS server. RADIUS clients, such as IPmux-24, communicate with the
RADIUS server to authenticate users.
When enabled, IPmux-24 RADIUS client operates in the following modes:
• Remote – IPmux-24 uses authentication database stored at the RADIUS
server
• Remote/Local – IPmux-24 uses both RADIUS and local authentication
databases.
³ To configure RADIUS operation mode:
• From the Manager Access menu, select RADIUS Authentication and select one
of the authentication modes:
 Disable – RADIUS authentication is disabled
 Enable Remote – IPmux-24 uses authentication database stored at the
RADIUS server to check if the entered user name and password match the
data server records. User authentication fails if one the following occurs:
 No user name record is found
 Password does not match user name
 Connection to the RADIUS server is lost.
 Enable Remote Local – IPmux-24 uses authentication database stored at
the RADIUS server to check if the entered user name and password match
the data server records. If no user name record is found or a password
does not match user name, connection to the RADIUS server is lost,
IPmux-24 uses its internal authentication database.
³ To configure RADIUS client:
• From the Manager Access menu, select RADIUS Parameters and configure the
following:
 Server IP Address (IP address of the RADIUS server)