Specifications

Installation and Operation Manual Chapter 4 Configuration
IPmux-24 Ver. 1.5 Configuring IPmux-24 for Management 4-13
³ To add a new user:
1. Make sure that you logged in as su.
2. From the Management Access menu, select User access.
The User Access menu is displayed (see
Figure 4-14 ).
3. From the User Access menu, do the following:
 Select User name, and enter a name for a new user.
 Select Permission, and specify the user’s access rights (full control or
read-only).
 Select Access, and specify the user’s access methods (ASCII terminal,
Telnet, Web browser, Telnet and Web browser, or all of them).
When changing Permission and Access for an existing user, make sure to fill out
the ‘SU’ Password, New Password and Confirm fields (you can enter the current
user password for the New Password and Confirm).
 Select 'su' Password, and enter your current superuser password.
 Select New Password, and assign a password to a new user name.
 Select Confirm and re-enter the new user password to confirm it.
 Save new settings by typing S, when asked.
³ To delete an existing user:
• From the User Access menu, do the following:
 Type F to display a user that you intend to delete.
 Select 'su' password, and enter your current superuser password.
 Type D to delete the current user.
Configuration>System>Management>Management access>User access
1. User name ... (su)
2. Permission > (Full Control)
3. Access > (All)
4. 'su' password ... ()
5. New password ... ()
6. Confirmation ... ()
>
Please select item <1 to 6>
ESC-prev.menu; !-main menu; &-exit 1 Mngr/s
Figure 4-14. User Access Menu
Note