Specifications

Installation and Operation Manual Chapter 4 Configuration
IPmux-24 Ver. 1.5 Configuring IPmux-24 for Management 4-11
IPmux-24
Configuration>System>Management> SNMPv3 Settings> Target & Notify > Target Params
1. Name ... ()
2. Message Processing Model > ()
3. Security Model > ()
4. Security Name ... ()
5. Security Level > ()
>
ESC-prev.menu; !-main menu; &-exit 1 Mngr/s
Figure 4-11. Target Params Menu
Configuring Target Address
Each target must have a valid IP address. Also, a previously configured parameter
set and notification tags must be assigned to the target.
³ To configure the target address:
1. From the Targets & Notify menu (Configuration > System > Management >
SNMPv3 Settings > Targets & Notify), select Target Address.
The Target Address menu is displayed (see
Figure 4-12).
2. From the Target Address menu, configure the following:
 Name (ASCII string identifying the target)
 IP Address (Valid IP address of the NMS. The IP address must be in
xxx.xxx.xxx.xxx:162 format, where 162 is a standard SNMP port used for
sending traps.)
 Params Name (Name of the previously defined target parameter set to be
assigned to this target)
 Tag List (List of previously defined notification tags).
3. To view the summary of the SNMPv3 target configuration, select Summary
Target Table from the SNMPv3 Settings (Configuration > System >
Management > SNMPv3 Settings) menu.
IPmux-24
Configuration>System>Management> SNMPv3 Settings> Target & Notify > Target Address
1. Name ... ()
2. IP Address ... ()
3. Params Name ... ()
4. Tag List ... ()
>
ESC-prev.menu; !-main menu; &-exit 1 Mngr/s
Figure 4-12. Target Address Menu