Specifications

Installation and Operation Manual Chapter 4 Configuration
IPmux-24 Ver. 1.5 Configuring IPmux-24 for Management 4-9
2. To view the summary of the SNMPv3 user configuration, select Summary User
Table from the SNMPv3 Settings (Configuration > System > Management >
SNMPv3 Settings) menu.
³ To delete an SNMPv3 user:
1. From the Users menu (Configuration > System > Management > SNMPv3
Settings > Users), type f or b to select an SNMPv3 user.
2. Type r to delete the selected user.
Adding Notification Entries
³ To add a notification entry:
1. From the Targets & Notify menu (Configuration > System > Management >
SNMPv3 Settings > Targets & Notify), select Notify.
The Notify menu is displayed (see
Figure 4-9).
2. From the Notify menu, perform the following:
 Name (ASCII string identifying the notification entry)
 Tag (A tag value to be associated with the current notification entry. This
tag will be used to identify the current notification entry when
configuring the target address.)
IPmux-24
Configuration>System>Management> SNMPv3 Settings> Target & Notify > Notify
Type > (trap)
1. Name ...(agnCounterChange)
2. Tag ...(unmasked)
>
ESC-prev.menu; !-main menu; &-exit 1 Mngr/s
Figure 4-9. Notify Menu
Assigning Traps
One or more traps must be assigned to each notification entry.
³ To assign traps to notification entries:
1. From the Target & Notify menu, select Trap.
The Trap menu is displayed.
2. From the Trap menu, configure the following:
 Tag Name (A tag from the list of previously defined notification tags)
 Trap (A trap to be assigned to the selected tag).