Specifications

Installation and Operation Manual Chapter 3 Operation

IPmux-24 Ver. 1.5 Configuration and Management Alternatives 3-7

3.4 Configuration and Management Alternatives

If required, IPmux-24 can be reconfigured. The IPmux-24 configuration and

monitoring operations are performed using any of the following tools:

• ASCII terminal connected to supervisory port

• Web-based management system, using a Web browser running on a PC

connected to the network

• RADview, RAD’s SNMP-based management system with a graphical user

interface. See RADview SC/TDMoIP User's Manual for details

• Third-party SNMP-based management systems.

Detailed configuration procedures are given in

Chapter 4

The following functions are supported by the IPmux-24 management software

• Viewing system information

• Modifying configuration and mode of operation, including setting system

default values

• Monitoring IPmux-24 performance

• Initiating diagnostic tests

• Uploading and downloading software and configuration files.

Working with Terminal

IPmux-24 includes a V.24/RS-232 asynchronous DCE port, designated CONTROL

and terminated in a 9-pin D-type female connector. The control port continuously

monitors the incoming data stream and immediately responds to any input string

received through this port.

The IPmux-24 control port can be configured to communicate at the following

rates: 9.6, 19.2, 38.4, 57.6 or 115.2 kbps.

³ To start a terminal control session:

1. Make sure all IPmux-24 cables and connectors are properly connected.

2. Connect IPmux-24 to a PC equipped with an ASCII terminal emulation

application (for example, Windows Hyper Terminal or Procomm).

3. Turn on the control terminal PC and set its port parameters to 115.2 kbps,

8 bits/character, 1 stop bit, no parity. Set the terminal emulator to ANSI

VT100 emulation (for optimal view of system menus).

To prevent unauthorized modification of the operating parameters, IPmux-24

supports three access levels:

• Superuser can perform all the activities supported by the IPmux-24

management facility.

• Users have read-only access, they cannot change any settings.