Specifications

Chapter 3 Operation Installation and Operation Manual
3-6 Default Settings IPmux-24 Ver. 1.5
Type Parameter Default Value
Destination bundle 1
TDM bytes in frame 1
Payload format V2
Far end type E1 or T1 (ESF)
OAM connectivity Enable
Jitter buffer 3.0
Sensitive Data
OOS mode Tx OOS
VLAN tagging Disable
VLAN ID 2
VLAN Priority 7
PSN Type MPLS/ETH
Outbound label tagging Disable
Next Hop Type IP
Bridge
VLAN Mode Unaware
Forwarding Mode Filter
Aging time 300
Bridge Port
Ingress Filtering Enable
Accept Frame Type All
L2CP Handling Tunnel
Port VID 1
Default Priority Tag 0
Tag Handling None
QoS
Classification
Network ETH1 802.1p
Network/User ETH2 802.1p
User ETH3 802.1p
TDM PW 802.1p
Rate Limitation (Egress)
Rate limitation No Limit
Rate Limitation (Ingress)
Rate limitation No Limit
Burst size 12
Limit Packet Type All