Specifications

IPmux-24 Ver. 1.5 Indicators 3-1
Chapter 3
Operation
This chapter:
• Provides a detailed description of the front panel controls and indicators and
their functions
• Explains power-on and power-off procedures
• Provides instructions for configuration using a terminal connected to the
IPmux-24 control port
• Provides instructions for configuration using a Web browser
• Illustrates the management menus.
For a detailed explanation of parameters on the menus, see
Chapter 4 .
3.1 Turning On the Unit
³ To turn on IPmux-24:
• Connect the power cord to the mains.
Once it is powered up, IPmux-24 operates automatically. IPmux-24 requires no
operator attention once installed, with the exception of occasional monitoring of
front panel indicators. Intervention is only required when IPmux-24 must be
configured to its operational requirements, or diagnostic tests are performed.
3.2 Indicators
The unit's LEDs are located on the front and rear panels (see Figure 3-1) .
Table 3-1 lists the functions of the IPmux-24 LED indicators.
RAD
IPmux-24
PWR TST 123
ETH
LINK/ACT
Figure 3-1. IPmux-24 Front Panel