Specifications

Installation and Operation Manual Chapter 2 Installation and Setup
IPmux-24 Ver. 1.5 Connecting to Power 2-7
Refer also to the sections describing connections of AC and DC mains at the
beginning of the manual.
Connecting AC Power
AC power is supplied to IPmux-24 through the 1.5m (5 ft) standard power cable
terminated by a standard 3-prong plug. The cable is supplied with the unit
according to the number of ordered power supplies.
³ To connect AC power:
1. Verify that the AC outlet is grounded properly. Ensure that the supply voltage
is in the range 100 VAC to 240 VAC.
2. Connect the power cable to the rear panel connector first and then to the
AC mains outlet.
Connecting DC Power
DC power is supplied via an AC/DC adapter plug provided with the unit.
³ To connect DC power:
• Refer to the DC power supply connection supplement for instructions how to
wire the DC adapters. The DC supplement is provided at the end of the
manual.
Note