Specifications

Chapter 1 Introduction Installation and Operation Manual
1-26 Technical Specifications IPmux-24 Ver. 1.5
Management
Methods
• SNMPv1, SNMPv3
• Telnet
• RADview Service Center TDMoIP (ordered separately)
• ASCII terminal via V.24 (RS-232) DCE port
Diagnostics
Loopbacks
• E1/T1 local loopback
• E1/T1 remote loopback
• T1 Facility Type 1 (FAC1) inband loopback
Statistics
E1/T1 As per G.826 and RFC 2495
Ethernet As per RFC 2819
Receive Buffer
Indication
Overflow, underflow, sequence error
Alarm Relay
Dry Contact Via pin 6, pin 7 and pin 8 of the EXT CLK connector
(RJ-45)
Indicators
General PWR (green) – Power
ALM (red/yellow) – Alarm status
SD (red/green) – External clock status
E1 E1 SYNC (red/green) – E1 synchronization
T1 T1 SYNC (red/green) – T1 synchronization
Ethernet LINK/ACT (green) – Link/activity status
Power
AC/DC Source 100–240 VAC, 50/60 Hz or 48/60 VDC nominal
(40 to 72 VDC)
DC Source 24 VDC nominal (18 to 36 VDC)
Power Consumption 13W max
Physical
Height 47 mm (1.8 in)
Width 215 mm (8.7 in)
Depth 147 mm (5.8 in)
Weight 0.7 kg (1.5 lb)
Environment
Temperature IPmux-24: 0°C to 50°C (32°C to 122°F)
IPmux-24/H: -30 to 65°C (-22 to 149°F)
Humidity Up to 90%, non-condensing