Specifications

Chapter 1 Introduction Installation and Operation Manual
1-10 Functional Description IPmux-24 Ver. 1.5
External Network Timing
When the edges of the network are synchronized by an external network clock
source, all the IPmux-24 units should be configured to work in loopback timing
mode (see
Figure 1-3 ). This topology enables any-to-any connectivity.
Figure 1-3. IPmux-24 in Loopback Timing Mode
External timing from the network can also be issued to IPmux-24 by external clock
input.
Figure 1-4. IPmux-24 in External Clock Mode