Specifications

Installation and Operation Manual Chapter 1 Introduction
IPmux-24 Ver. 1.5 Functional Description 1-7
1.2 Physical Description
IPmux-24 is a compact, easy-to-install standalone unit. Figure 1-2 shows a 3D
view of an IPmux-24 unit.
Figure 1-2. IPmux-24 3D View
The front panel includes the IPmux-24 LEDs. For the detailed LED description, see
Chapter 3 .
User, network, external clock and management ports, and the power supply
connectors are located on the rear panel of the unit. For further details, see
Chapter 2 .
1.3 Functional Description
IPmux-24 provides TDM connectivity across the Ethernet, MPLS or IP network. A
single bundle (group of timeslots) can be transmitted in a TDM pseudowire (PW)
to a predefined far-end bundle. IPmux-24 supports ICMP (ping), and generates
ARP in case of unknown next hop MAC addresses, answers ARP requests, and
supports the 802.3 VLAN Ethernet format.
IPmux-24 includes one, two or four E1 or T1 ports. Traffic is transmitted over the
network as E1/T1 or fractional E1/T1, using the TDMoIP, CESoPSN, SAToP or
HDLCoPSN method.
IPmux-24 supports two Ethernet user ports for user LAN connectivity.
Configuration and management are provided via the IPmux-24 local terminal,
Web-based management utility, Telnet or RADview management tool (SNMP).