Specifications

Publication No. SUP-930-07/08
The Access Company
AC/DC Adapter
(AD) Plug
for DC Power Supply Connection
Supplement
Ignore this supplement if the unit is AC-powered.
Certain units are equipped with a wide-range
AC/DC power supply. These units are equipped
with a standard AC-type 3-prong power input
connector located on the unit rear panel. This
power input connector can be used for both AC
and DC voltage inputs.
For DC operation, a compatible straight or
90-degree AC/DC Adapter (AD) plug for attaching
to your DC power supply cable is supplied with
your RAD product (see
Figure 1 and Figure 2 ).
Connect the wires of your DC power supply cable
to the AD plug, according to the voltage polarity
and assembly instructions provided on
page 2 .
Figure 1. Straight AD Plug
Figure 2. 90-Degree AD Plug
Prepare all connections to the AD plug before inserting it into the unit’s power
connector.
Caution
Note