Specifications

Chapter 6 Diagnostics and Troubleshooting Installation and Operation Manual
6-16 Displaying System Messages IPmux-24 Ver. 1.5
Masking Alarm Traps
You can mask some IPmux-24 alarm traps to prevent it from being sent to the
management stations.
³ To mask alarms:
1. From the Management menu, select Alarm trap mask.
The Alarm Trap Mask menu appears (see
Figure 6-10 ).
2. From the Alarm Traps Mask menu, select Alarm ID to choose alarm that you
intend to mask.
List of the alarm traps can be displayed by typing ?.
3. Select Trap Status to enable or disable masking of the selected alarm.
Configuration>System>Management>Alarm trap mask
Active alarm traps: > (-)
1. Alarm ID <use 'help'>[1 - 40] ... (39)
2. Trap status (Masked)
>
Please select item <1 to 2>
S - Save; ? - Help
ESC-prev.menu; !-main menu; &-exit 1 Mngr/s
Figure 6-10. Alarm Trap Mask Menu
Table
6-5. Trap List
Trap Description, Severity OID
alarmLOS Loss of Signal (LOS Physical Layer), major 1.3.6.1.4.1.164.6.1.3.0.7
alarmLOF Loss of Frame (LOF Physical Layer), major 1.3.6.1.4.1.164.6.1.3.0.8
alarmAIS Alarm Indication Signal Received (AIS Line Physical
Layer), major
1.3.6.1.4.1.164.6.1.3.0.10
alarmRDI Remote Defect Indication Received (RDI Line
Physical Layer), major
1.3.6.1.4.1.164.6.1.3.0.11
alarmFEBE Far End Block Error (FEBE Line Layer), major 1.3.6.1.4.1.164.6.1.3.0.12
alarmExtClk External clock source has failed, minor 1.3.6.1.4.1.164.6.1.0.10
BundleConenctionStatus Bundle connectivity status:
• O.K – major
• Remote fail – minor
• Local fail – major
• Validation Fail – major
• Unavailable – major
1.3.6.1.4.1.164.6.1.3.0.15
Note