Specifications

Chapter 6 Diagnostics and Troubleshooting Installation and Operation Manual
6-14 Displaying System Messages IPmux-24 Ver. 1.5
Clearing Events
³ To clear the event log:
1. From the Event Log menu, select Clear log file.
IPmux-24 displays the following message:
Logfile will be cleared. Continue ??? (Y/N)
2. Type Y to confirm the log file clearing.
Table 6-4. Event List
Event Description Corrective Action
COLD START IPmux-24 has been powered up None
CON LOCAL FAIL Ethernet frames are not received by the
local IPmux-24 on the specified connection
Check Ethernet/IP path
CON REMOTE FAIL Ethernet frames are not received by the
remote IPmux-24 on the specified
connection
Check Ethernet/IP path
CON SYNC Bundle connection failure has ended (only
applicable when OAM is Enabled)
None
CON UNAVAILABLE Remote IPmux is not available (only
applicable when OAM is Enabled)
Check the connection of the
remote IPmux
CON VALIDATION FAIL Connection is invalid (only applicable when
OAM is Enabled)
Check the bundle parameters
FATAL ERROR IPmux-24 has encountered an internal
fatal error
The IPmux-24 requires servicing
IN BAND REMOTE LOOP
START
T1 inband loopback has been activated on
remote IPmux-24
None
IN BAND REMOTE LOOP
END
T1 inband loopback has been deactivated
on remote IPmux-24
None
IN BAND LOCAL LOOP
START
T1 inband loopback has been activated on
local IPmux-24
None
IN BAND LOCAL LOOP
END
T1 inband loopback has been deactivated
on local IPmux-24
None
INVALID LOGIN VIA
TERMINAL
Invalid user name or password was
entered, when attempting to access
IPmux-24 via local terminal
None
INVALID LOGIN VIA WEB Invalid user name or password was
entered, when attempting to access
IPmux-24 via Web browser
None
INVALID LOGIN VIA
TELNET
Invalid user name or password was
entered, when attempting to access
IPmux-24 via Telnet
None