Specifications

Chapter 5 Configuring IPmux-24 for Typical Applications Installation and Operation Manual
5-10 Typical Pseudowire Application with Ring Protection IPmux-24 Ver. 1.5
12. Connecting bundles to the central Gmux-2000
Table 5-2. Configuration Summary
Device E1 Parameters Management
Host
Parameters
PW Host
Parameters
Bundle Parameters Ring Traffic
IPmux-24 (A)
Transmit clock source:
Adaptive
Line type: Framed
G.704 CRC-4 enabled
CAS disabled
IP address:
192.168.10.2
VLAN ID: 9
VLAN priority: 5
IP address:
192.168.11.2
VLAN ID: 11
VLAN priority: 6
Bundle 1: TS 1–10
Bundle 2: TS 11–15
VLAN ID: 100
VLAN priority: 7
IPmux-24 (B)
Transmit clock source:
Adaptive
Line type: Framed
G.704 CRC-4 enabled
CAS disabled
IP address:
192.168.10.3
VLAN ID: 9
VLAN priority: 5
IP address:
192.168.11.3
VLAN ID: 11
VLAN priority: 6
Bundle 1: TS 1–10
Bundle 2: TS 11–15
VLAN ID: 100
VLAN priority: 7
IPmux-24 (C)
Transmit clock source:
Adaptive
Line type: Framed
G.704 CRC-4 enabled
CAS disabled
IP address:
192.168.10.4
VLAN ID: 9
VLAN priority: 5
IP address:
192.168.11.4
VLAN ID: 11
VLAN priority: 6
Bundle 1: TS 1–10
Bundle 2: TS 11–15
VLAN ID: 100
VLAN priority: 7
IPmux-24 (C)
Transmit clock source:
Adaptive
Line type: Framed
G.704 CRC-4 enabled
CAS disabled
IP address:
192.168.10.5
VLAN ID: 9
VLAN priority: 5
IP address:
192.168.11.5
VLAN ID: 11
VLAN priority: 6
Bundle 1: TS 1–10
Bundle 2: TS 11–15
VLAN ID: 100
VLAN priority: 7
Configuring the Management Host
Refer to the Configuring the Management Host section above for instruction on
how to configure the management host parameters of the IPmux-24 units.
Setting the TDM Physical Layer Parameters
Refer to the Configuring E1 Parameters at the Physical Layer section above for
instruction on how to configure physical layer of the E1 interfaces.
Configuring the Pseudowire Host
Refer to the Configuring the Pseudowire Host section above for instruction on
how to define the pseudowire host for PW traffic.