Specifications

Chapter 5 Configuring IPmux-24 for Typical Applications Installation and Operation Manual
5-8 Typical Pseudowire Application with Ring Protection IPmux-24 Ver. 1.5
Configuring the VLAN Membership
³ To configure the VLAN Membership:
• From the VLAN Membership menu (Configuration > Bridge > VLAN
Membership), set the IPmux-24 network port to be a tagged member of VLAN
11 (IPmux-24 A) or VLAN 12 (IPmux-24 B):
1. Type a to invoke the Add mode.
2. In the Add mode, set VLAN ID to 11 (IPmux-24 A) or VLAN 12 (IPmux-24
B).
3. Save the changes.
4. Select Egress Tagged Ports and type a to invoke the Add mode.
5. In the Add mode, set Egress Tagged Port to 1.
Configuration>Bridge>Vlan Membership
Vlan Id[1 - 4094] ... (11)
1. Egress Tagged Ports > (1)
2. Egress Untagged Ports > (–)
>
Please select item <1 to 2>
A - Add New VLAN ; F - Forward ; D - Delete
ESC-prev.menu; !-main menu; &-exit 1 Mngr/s
Figure 5-10. Configuring Network Port as VLAN 11 Members (IPmux-24 A)
5.2 Typical Pseudowire Application with Ring
Protection
The section provides detailed instructions for configuring four IPmux-24 units in a
ring topology operating opposite a centrally located Gmux-2000 (see
Figure 5-11 ).
Each IPmux-24 transfers PW data to Gmux-2000 over two bundles. Data flow
between the IPmux-24 devices is protected by the VLAN-based resilient Ethernet
ring.