Specifications

Installation and Operation Manual Chapter 5 Configuring IPmux-24 for Typical Applications
IPmux-24 Ver. 1.5 Typical Pseudowire Application 5-7
Configuration>Connection>Bundle connection
TDM channel ID: 1 Bundle ID: 1
1. Destination IP address ... (GbE IP address)
2. Next hop ... (0.0.0.0)
3. IP TOS[0 - 255] ... (0)
4. Connection status (Enable)
5. Destination bundle[1 - 8063] ... (GbE bundle)
6. TDM bytes in frame(x48 bytes)[1 - 30] ... (1)
7. Payload format (V2)
8. Far end type > (E1)
9. OAM connectivity (Enable)
10. Jitter buffer [msec][2.5 - 200] ... (5)
11. Sensitive (Data)
12. OOS mode (Tx OOS)
13. VLAN tagging (Enable)
14. VLAN ID[1 - 4095] ... (11)
15. VLAN priority[0 - 7] ... (7)
>
Please select item <1 to 15>
F - Forward Bundle ID; D - Delete; ? - Help
ESC-prev.menu; !-main menu; &-exit
Figure 5-8. Connecting Bundle 1 of IPmux-24 (A)
Configuring the Bridge
³ To configure the bridge:
• From the Bridge menu (Configuration > Bridge), configure the following:
 VLAN Mode – Aware
 Forwarding Mode –Filter
Configuration>Bridge
1. VLAN Mode (Aware)
2. Forwarding Mode (Filter)
3. Aging Time[300 - 3060] ...(300)
4. Static MAC Table []>
5. Erase MAC Table
6. Bridge Port >
7. VLAN Membership >
ESC-prev.menu; !-main menu; &-exit 1 Mngr/s
Figure 5-9. Configuring the General Bridge Parameters