Specifications

Chapter 5 Configuring IPmux-24 for Typical Applications Installation and Operation Manual
5-6 Typical Pseudowire Application IPmux-24 Ver. 1.5
Configuration>Connection>DS0 Bundle
TDM channel ID: 1 Bundle ID: 1
+1 +2 +3 +4 +5 +6 +7 +8 +9 +10
TS 0 1 1 1 1 1 1 1 1 1 1
TS 10 0 0 0 0 0 0 0 0 0 0
TS 20 0 0 0 0 0 0 0 0 0 0
TS 30 0
1. Change cell [0 - 1] ... (0)
>
Please select item <1 to 2>
ESC-prev.menu; !-main menu; &-exit 1 Mngr/s
Figure 5-7. Assigning Timeslots 1–10 to a Bundle 1
3. Repeat steps 1–2 to define bundles 2, 3 and 4 with the following timeslot
assignments:
 Bundle 2 – timeslots 11 to 15
 Bundle 3 –timeslots 16 to 20
 Bundle 4 – timeslots 21 to 30.
Connecting the Bundles
³ To connect the bundles:
1. Display the Bundle Connection Configuration menu (Configuration >
Connection > Bundle connection, TDM Channel ID:1 Bundle ID:1) and
configure the following parameters:
 Destination IP address for the bundles – IP address of the GbE module
installed Gmux-2000
 Connection status – Enable
 Destination bundle – any existing bundle of the GbE module installed
Gmux-2000
 Jitter buffer – 5 msec
 OAM connectivity – Enabled.
2. Leave all other parameters with their default values.
3. Save the changes.
The VLAN tagging mode, VLAN ID and VLAN priority are automatically
changed to the configured PW host VLAN values.