Specifications

Installation and Operation Manual Chapter 5 Configuring IPmux-24 for Typical Applications
IPmux-24 Ver. 1.5 Typical Pseudowire Application 5-5
Configuring the Pseudowire Host
Define parameters of the PW host to be used as a destination for the incoming
pseudowire traffic.
³ To configure the pseudowire host:
1. From the PW host IP menu (Configuration > Connection > PW Host IP),
configure the following:
 PW host IP address of IPmux-24 (A) – 192.168.11.2
 PW host IP mask of IPmux-24 (A) – 255. 255. 255.0
 PW host IP address of IPmux-24 (B) – 192.168.11.3
 PW host IP mask of IPmux-24 (B) – 255. 255. 255.0
2. From the PW Encapsulation menu (Configuration > Connection > PW host IP >
PW Encapsulation), configure the VLAN parameters of the PW host as follows:
 PW host VLAN of IPmux-24 (A) – 11
 PW host VLAN priority of IPmux-24 (A) – 7
 PW host VLAN of IPmux-24 (B) – 12
 PW host VLAN priority of IPmux-24 (B) –
7
Configuration>Connection>PW Host IP
1. IP address ... (192.168.11.2)
2. IP mask ... (255. 255. 255.0)
3. Default next hop ... (-)
4. Pw Encapsulation >
>
Please select item <1 to 4>
ESC-prev.menu; !-main menu; &-exit 1 Mngr/s
Figure 5-6. Configuring the Pseudowire Host IP for IPmux-24 (A)
Configuring Bundles
³ To assign timeslots to a bundle:
1. Display the Connection menu (Configuration > Connection), and assign
number 1 to a bundle.
2. Display the DS0 Bundle Configuration menu (Configuration > Connection >
DS0 bundle, TDM Channel ID:1 Bundle ID:1 ), and assign timeslots 1 to 10 to
bundle 1.