Specifications

Installation and Operation Manual Chapter 5 Configuring IPmux-24 for Typical Applications
IPmux-24 Ver. 1.5 Typical Pseudowire Application 5-3
3. Set the IPmux-24 (A) host IP address – 192.168.10.2
4. Set the IPmux-24 (B) host IP address – 192.168.10.3
5. Save the changes.
Configuration>System>Management>Host IP
1. IP address ... (192.168.10.2)
2. IP mask ... (255.255.255.0)
3. Default gateway ... (–)
4. DHCP (Disable)
5. DHCP Status >
6. Read Community ... (public)
7. Write Community ... (private)
8. Trap Community ... (SNMP_trap)
9. Encapsulation >
>
Please select item <1 to 9>
ESC-prev.menu; !-main menu; &-exit 1 Mngr/s
Figure 5-2. Configuring Host IP Parameters for IPmux-24 (A)
³ To configure the management host encapsulation:
• Display the Encapsulation menu (Configuration > System > Management >
Host IP > Encapsulation), and configure the VLAN ID and priority of the
management traffic:
1. Set the Host Tagging to Tagged.
2. Set the IPmux-24 (A) host VLAN ID to 9 and its VLAN priority to 5.
3. Set the IPmux-24 (B) host VLAN ID to 10 and its VLAN priority to 5.
4. Save the changes.
IPmux-24
Configuration>System>Management>Host IP>Encapsulation
1. Host Tagging (Tagged)
2. Host VLAN ID [1 - 4094] ... (9)
3. Host VLAN Priority [0 - 7] ... (5)
>
ESC-prev.menu; !-main menu; &-exit 1 Mngr/s
Figure 5-3. Configuring the Management Host Encapsulation for IPmux-24 (A)
³ To configure the manager list:
1. From the Management List menu (Configuration > System > Management >
Manager List), type a to add a management station.
The Management List menu display changes, entering the Add mode.
2. When in Add mode: