Specifications

Chapter 4 Configuration Installation and Operation Manual
4-56 Additional Tasks IPmux-24 Ver. 1.5
Utilities>File Utilities>Download/upload using TFTP
1. File name ... (FILE.IMG)
2. Command > (No operation)
3. Server IP ... (0.0.0.0)
4. Retry timeout(sec)[0 - 1000] ... (1)
5. Total timeout(sec)[0 - 1000] ... (5)
6. View transfer status >
>
ESC-prev.menu; !-main menu; &-exit 1 Mngr/s
Figure 4-48. Download/Upload Using TFTP Menu
Resetting IPmux-24
IPmux-24 supports two types of reset:
• Reset to the default setting
 Resetting all parameters
 Resetting all parameters, except for management values
• Overall reset of the device.
Resetting IPmux-24 to the Defaults
You can reset IPmux-24 to its default settings. The reset to the defaults does not
affect the master clock setting. In addition, you can reset local IPmux-24 without
affecting its management parameters (host IP address, mask and default
gateway, defined network managers and management access methods).
³ To reset IPmux-24 to the default settings:
1. From the System menu, select Factory default.
2. From the Factory Default menu, perform one the following steps:
 Select All to reset all IPmux-24 parameters to the default settings.