Specifications

Installation and Operation Manual Chapter 4 Configuration
IPmux-24 Ver. 1.5 Additional Tasks 4-55
 Port Status – Status of the IPmux-24 network port in the ring application:
 Blocking – The port operates as a blocking node, transferring the ring
status messages only
 Up – The port is operational
 Down – The port ins not operational
Monitoring>Status>Protection
Ring Status > (CLOSED)
Port 1 Status > (UP)
Port 2 Status > (Down)
ESC-prev.menu; !-main menu; &-exit 1 M/ 1 C
Figure 4-47. Protection Status Screen
Transferring Software and Configuration Files
Software and configuration files can be transferred using TFTP.
³ To transfer a file using TFTP:
1. From the Utilities menu, select File Utilities.
2. From the File Utilities, select Download/Upload using TFTP.
3. From the Download/Upload using TFTP menu, configure the following:
 File name (Name of the file that you intend to transfer)
 Command (Operation type)
 No operation
 Software download
 Software upload
 Configuration download
 Configuration upload
 Software download and reset
 Server IP (IP address of the TFTP server)
 Retry Timeout (Interval between connection retries in seconds).
 Total Timeout (TFTP connection timeout in seconds)
 View Transfer Status (Current status of the TFTP transfer)
4. Save the changes.
IPmux-24 starts file transfer using TFTP.