Specifications

Chapter 4 Configuration Installation and Operation Manual
4-54 Additional Tasks IPmux-24 Ver. 1.5
Monitoring>Status>System clock
Active clock > (Adaptive)
> (Channel 1)
ESC-prev.menu; !-main menu; &-exit
Figure 4-45. System Clock Status Screen
Displaying List of Connected Managers
³ To display list of managers currently connected to IPmux-24:
• From the Managers menu (Monitoring > Managers), select Connected
Managers.
The Connected Managers screen is displayed (
Figure 4-46 ).
The Connected Managers screen includes the following information:
 IP Address – IP address of the connected remote agent. For an ASCII
terminal connection (UART), this field remains empty.
 Terminal Type – Type of the terminal used by the manager (UART, Telnet,
SSL, SSH)
 User Name – The login user name.
Monitoring>Managers>Connected Managers
Index IP Address Terminal Type User Name
1 UART su
2 158.15.163.20 SSH su
3 158.15.163.30 SSL user
4 158.15.163.40 Telnet user
R - Refresh Table
ESC-prev.menu; !-main menu; &-exit; ?-help
Figure 4-46. Connected Managers Screen
Displaying the Ring Status Information
When the Ethernet ring is enabled, IPmux-24 allows displaying status of the ring,
as well as the status of the network ports and MAC addresses the adjacent
nodes.
³ To display the ring status information:
• From the Status menu, select Protection.
Protection menu is displayed.
The Protection Status screen displays the following information:
 Ring status – Status of the protection ring
 Closed – The ring is closed, data flow is normal
 Open – The ring is open, data flow is reversed
 Disabled – The ring is not operational