Specifications

Installation and Operation Manual Chapter 4 Configuration
IPmux-24 Ver. 1.5 Additional Tasks 4-53
 Local Fail (Bundle failure at the local IPmux-24)
 Remote Fail (Bundle failure at the remote IPmux-24)
 Unavailable (Network problems or configuration error (only applicable
when OAM is enabled))
 Validation Fail (The remote IPmux-24 replies, but there is a
configuration mismatch (only applicable when OAM is enabled))
 Sequence errors (Total number of sequence errors (lost or misordered
packets) occurred on the bundle)
 Jitter buffer underflows (Total number of jitter buffer underflows occurred
on the bundle)
 Jitter buffer overflows (Total number of jitter buffer overflows occurred
on the bundle).
Monitoring>Status>Connection
Destination IP address: (1.1.1.1)
Next hop MAC address: (000000000000)
Connectivity status: > (OK)
Sequence errors: (0)
Jitter buffer underflows: (0)
Jitter buffer overflows: (0)
1. Bundle ID[1 – 127 ] ... (1)
>
C - Clear counters; F - Forward Bundle ID
ESC-prev.menu; !-main menu; &-exit 1 Mngr/s
Figure 4-44. Connection Screen
Displaying the System Clock Information
You can view the status of the active system clock. The system clock status
information is available only if the transmit clock source of one of the TDM links
is set to the system timing.
³ To display the system clock status:
• From the Status menu, select System clock.