Specifications

Installation and Operation Manual Chapter 4 Configuration
IPmux-24 Ver. 1.5 Additional Tasks 4-49
Rate Limit Burst Size Rate Limit Burst Size
12 kB 24 kB 48 kB 96 kB 12 kB 24 kB 48 kB 96 kB
25 Mbps
9 9 9 9
400 Mbps
9 9 9
X
30 Mbps
9 9 9 9
500 Mbps X
9 9 9
35 Mbps
9 9 9 9
666 Mbps
9 9 9
X
40 Mbps X X
9 9
Configuring Egress Rate Limitation
³ To configure the egress rate limitation:
1. From the QoS menu, select Rate Limitation.
The Rate Limitation menu is displayed.
2. From the Rate Limitation menu, select Egress.
The Egress menu is displayed.
3. From the Ingress menu, type f to select the network or user port to which
you intend to apply rate limitation.
4. Select Rate Limitation and define the maximum egress data rate allowed on
the port (see
Table 4-13 ).
4.3 Additional Tasks
This section describes additional operations available supported by the IPmux-24
management software, including the following:
• Displaying inventory
• Setting data and time
• Displaying IPmux-24 status
• Transferring software and configuration files
• Resetting the unit.
Displaying the IPmux-24 Inventory
The IPmux-24 inventory displays information on current software and hardware
revisions of the unit. It also provides the IPmux-24 interface description.
³ To display the IPmux-24 inventory:
• From the Main menu, select Inventory.