Specifications

Chapter 4 Configuration Installation and Operation Manual
4-48 Configuring IPmux-24 for Operation IPmux-24 Ver. 1.5
bursts permitted only if the traffic has been sent to the IPmux-24 below the
rate limit for a certain period of time.
5. Select Limit Packet Type and choose a packet type to which the rate/burst
limitation is to be applied:
 All – The limitation is applied to all arriving packets
 Broadcast – The limitation is applied to broadcast packets
 Multicast & Flooded – The limitation is applied to multicast and flooded
packets
 Broadcast & Multicast – The limitation is applied to broadcast and
multicast packets
 Broadcast – The limitation is applied to broadcast packets.
IPmux-24
Configuration>QoS>Rate Limitation>Ingress
Port Label > (1)
Port > (Network Port)
1. Rate Limitation > (No Limit)
2. Burst Size (in kB) > (96)
3. Limit Packet Type > (All)
>
F - Forward S – Save
ESC-prev.menu; !-main menu; &-exit 1 Mngr/s
Figure 4-38. Ingress Rate Limitation Menu
Table
4-13. Rate and Burst Limitation
Rate Limit Burst Size Rate Limit Burst Size
12 kB 24 kB 48 kB 96 kB 12 kB 24 kB 48 kB 96 kB
1 Mbps
9 9 9 9
41 Mbps
9 9
X X
1.5 Mbps
9 9 9 9
45 Mbps X
9 9 9
2 Mbps
9 9 9 9
50 Mbps
9 9 9 9
3 Mbps
9 9 9 9
60 Mbps
9 9 9 9
4 Mbps
9 9 9 9
71 Mbps X X
9 9
5 Mbps
9 9 9 9
83 Mbps
9 9 9 9
6 Mbps
9 9 9 9
90 Mbps X X
9 9
7 Mbps
9 9 9 9
100 Mbps X
9 9 9
8 Mbps
9 9 9 9
125 Mbps
9 9 9 9
9 Mbps
9 9 9 9
166 Mbps X
9 9 9
10 Mbps
9 9 9 9
200 Mbps X X
9 9
15 Mbps
9 9 9 9
250 Mbps
9 9 9 9
20 Mbps
9 9 9 9
333 Mbps X X
9 9