Specifications

Chapter 4 Configuration Installation and Operation Manual
4-46 Configuring IPmux-24 for Operation IPmux-24 Ver. 1.5
 IP Precedence (Priority is determined according to IP ToS field)
 Per Port (Priority is determined by the port default VLAN priority. In the
case of the pseudowire traffic it is copied from the host priority setting.).
IPmux-24
Configuration>QoS>Priority>Classification
1. Network ETH1 >(802.1p)
2. Network/User ETH2 >(802.1p)
3. User ETH3 >(802.1p)
4. TDM PW >(802.1p)
>
ESC-prev.menu; !-main menu; &-exit 1 Mngr/s
Figure 4-36. Classification Menu
³ To define the priority mapping:
1. Once the priority type is defined, select Mapping from the Priority menu.
The Mapping menu appears. The Mapping menu changes according to the
selected priority type (802.1p, DSCP, IP Precedence, per port).
2. From the Mapping menu, select one of the classification methods:
 802.1p priority – Assign each priority tag, supported by IEEE 802.1p (0–7)
to a specific priority queue (traffic class 0 (lowest), traffic class 1, traffic
class 2, or traffic class 3)
 DSCP priority – Assign each DS codepoint (0–63) to a specific priority
queue (traffic class 0 (lowest), traffic class 1, traffic class 2, or traffic
class 3)
 IP Precedence priority – Assign each IP ToS field value (0–7) to a specific
priority queue (traffic class 0 (lowest), traffic class 1, traffic class 2, or
traffic class 3)
 Per port priority – Per port mapping is determined by default VLAN
priority of the bridge port.