Specifications

Installation and Operation Manual Chapter 4 Configuration
IPmux-24 Ver. 1.5 Configuring IPmux-24 for Operation 4-45
2. Press <Esc> to return to the VLAN Membership menu.
3. Save the changes.
IPmux-24
Configuration>Bridge>VLAN Membership>Egress Tagged Ports
1. [1 - 3]... (-)
>
Please select item <1 to 1>
ESC-prev.menu; !-main menu; &-exit; A-add 1 Mngr/s
Figure 4-34. Egress Tagged Ports Menu, Add Mode
IPmux-24
Configuration>Bridge>VLAN Membership>Egress Tagged Ports
1. [1 - 3]... (1)
2. Delete Range...
>
Please select item <1 to 2>
ESC-prev.menu; !-main menu; &-exit; A-add 1 Mngr/s
Figure 4-35. Port 1 is about to be Added to VLAN 1 as a Tagged Port
Configuring Quality of Service (QoS)
IPmux-24 supports configuration of two QoS categories: priority and rate
limitation. QoS configuration is performed via the QoS menu (Main menu >
Configuration > QoS).
Configuring the Traffic Priority
IPmux-24 provides four priority queues for each port or pseudowire traffic. User
traffic can be prioritized according to the VLAN priority, DSCP, IP Precedence or
per port basis.
³ To select the traffic priority type:
1. From the Configuration menu, select QoS.
The QoS menu is displayed.
2. From the QoS menu, select Priority.
The Priority menu is displayed (see
Figure 4-36 ).
3. From the Priority menu, select Classification and from the Classification menu
choose one of the following traffic prioritization methods for each IPmux-24
port or its pseudowire traffic:
 802.1p (Priority is determined according to VLAN priority)
 DSCP frame DSCP field (the Differentiated Services Codepoint, as
specified in RFC 2474).