Specifications

Installation and Operation Manual Chapter 4 Configuration
IPmux-24 Ver. 1.5 Configuring IPmux-24 for Operation 4-43
Configuring L2CP Handling
Each IPmux-24 bridge port can be configured to tunnel or discard layer 2 control
protocol traffic. Tunneling the L2CP traffic allows service providers access
network equipment connected to IPmux-24,
³ To configure the L2CP handling:
1. From the Bridge Port menu (Configuration > Configuration > Bridge > Bridge
Port), type f to select the bridge port which L2CP policy you intend to
configure.
2. Select L2CP Handling.
The L2CP Handling menu is displayed (see
Figure 4-33 ).
3. From the L2CP Handling menu, select one of the standard multicast MAC
addresses and define how the bridge port handles its L2CP traffic:
 Tunnel (L2CP frames are forwarded as ordinary data)
 Discard – (L2CP frames are discarded)
Default: Tunnel
IPmux-24
Configuration>Configuration>Bridge>Bridge Port>L2CP Handling
MAC Dest Address Handling
1. 01:80:C2:00:00:00 (Tunnel)
2. 01:80:C2:00:00:01 (Tunnel)
3. 01:80:C2:00:00:02 (Tunnel)
4. 01:80:C2:00:00:03 (Tunnel)
5. 01:80:C2:00:00:04 (Tunnel)
6. 01:80:C2:00:00:05 (Tunnel)
7. 01:80:C2:00:00:06 (Tunnel)
8. 01:80:C2:00:00:07 (Tunnel)
9. 01:80:C2:00:00:08 (Tunnel)
10.01:80:C2:00:00:09 (Tunnel)
11.01:80:C2:00:00:0A (Tunnel)
12.01:80:C2:00:00:0B (Tunnel)
... (N)
>
Please select item <1 to 16>
ESC-prev.menu; !-main menu; &-exit 1 M/ 1 C
Figure 4-33. L2CP Handling Menu
Configuring the VLAN Membership
Each IPmux-24 port can be defined as a VLAN member. The ports can also be
configured to add or to strip the VLAN tag at the egress.