Specifications

Chapter 4 Configuration Installation and Operation Manual
4-42 Configuring IPmux-24 for Operation IPmux-24 Ver. 1.5
 Ingress Filtering (Controls filtering of the incoming traffic)
 Enable (The bridge port accepts only frames with tags of the VLANs,
which include this user port as a member.)
 Disable (The bridge port accepts all incoming frames)
 Accept Frame Type (Specifies the frame types to be accepted by the
bridge port)
 All (The bridge port accepts all frames (tagged, untagged,
priority-tagged). Untagged and priority-tagged frames receive PVID of
the user bridge port.)
 Tag only (The bridge port accepts only tagged frames, discarding
untagged and priority-tagged)
The Ingress Filtering and Accept Frame Type parameters are available only in the
VLAN-aware mode.
 Port VID (Port VID to be added by the user bridge port to the arriving
frames): 1–4094
PVID operation depends on the tag handling mode:
• None – PVID is added to the untagged and priority-tagged frames only.
• Stack – PVID is added to all arriving frames (tagged, untagged or priority
tagged).
 Default Priority Tag (Default priority tag to be added by the user bridge
port to the untagged frames. No default priority tags are added to the
frames arriving with assigned port priority): 0–5.
 Tag Handling (Defines if user ports add port VID only to untagged or to all
arriving frames)
 None (PVID is added to the untagged and priority-tagged frames
only)
 Stack (PVID is added to all arriving frames)
IPmux-24
Configuration>Configuration>Bridge>Bridge Port
Port Label > (3)
Bridge Port > (User1)
1. Port VID\Stacking VID [1 - 4094] ... (1)
2. Default Priority Tag [0 - 2] ... (0)
3. Tag Handling (None)
4. L2CP Handling >
>
F - Forward
ESC-prev.menu; !-main menu; &-exit 1 Mngr/s
Figure 4-32. Bridge Port Menu (User 1, VLAN-Unaware Mode)
Note
Note