Specifications

Installation and Operation Manual Chapter 4 Configuration
IPmux-24 Ver. 1.5 Configuring IPmux-24 for Operation 4-41
³ To delete learned addresses from the MAC table:
1. From the Bridge menu, select Erase MAC Table to delete all learned addresses
from the MAC table.
IPmux-24 displays the following message: MAC table will be
cleared. Continue??? (Y/N)
2. Type Y to confirm deletion of all learned MAC addresses from the table.
IPmux-24
Configuration>Configuration>Bridge>Static MAC Table
MAC Address Received Bridge Port
1 10-00-00-00-00-00 Network
A - Add R – Remove C - Clear Table
ESC-prev.menu; !-main menu; &-exit; ?-help
Figure 4-29. Static MAC Table (VLAN-Unaware)
IPmux-24
Configuration>Configuration>Bridge>Static MAC Table
VLAN ID MAC Address Received Bridge Port
1 1 10-00-00-00-00-00 Network
A - Add R – Remove C - Clear Table
ESC-prev.menu; !-main menu; &-exit; ?-help
Figure 4-30. Static MAC Table (VLAN-Aware)
IPmux-24
Configuration>Configuration>Bridge>Static MAC Table
1. Vlan Id[1 - 4094] (0)
2. MAC Address ... (10-00-00-00-00-00)
3. Received Bridge Port > (Network)
4. Save All
>
ESC-prev.menu; !-main menu; &-exit 1 Mngr/s
Figure 4-31. Static MAC Table, Add Mode (VLAN-Aware)
Configuring the Bridge Ports
IPmux-24 bridge ports support filtering of incoming traffic, accepting all frames or
only those, which have VLAN tags. The incoming frames can be assigned PVID and
priority by the bridge ports.
³ To configure the bridge ports:
1. From the Bridge menu, select Bridge Port.
The Bridge Port menu is displayed (see
Figure 4-32 ).
2. From the Bridge Port menu, type f to select the bridge port that you intend
to configure, and set the following parameters: