Specifications

Installation and Operation Manual Chapter 4 Configuration
IPmux-24 Ver. 1.5 Configuring IPmux-24 for Operation 4-37
Table 4-9. Connection Parameters (SAToP Connection, UDP/IP PSN)
Parameter Function Values
Destination IP Address See Table 4-5
Next Hop See Table 4-5
IP TOS See Table 4-5
Connection Status See Table 4-5
Destination bundle See Table 4-5
TDM Bytes in Packet Defines UDP payload length (number of
payload bytes in one Ethernet frame)
32–1440 (E1)
24–1440 (T1)
Payload Format See Table 4-5
OAM connectivity See Table 4-5
Jitter Buffer See Table 4-5 0.5–180
Sensitive See Table 4-5
OOS Mode See Table 4-5
VLAN Tagging See Table 4-5
VLAN ID See Table 4-5
VLAN Priority See Table 4-5
Table 4-10. Connection Parameters (SAToP Connection, MPLS/ETH PSN)
Parameter Function Values
Destination IP Address See Table 4-5
Outbound Label
Tagging
See Table 4-6
Outbound Tunnel Label See Table 4-6
Outbound EXP Bits See Table 4-6
Connection Status See Table 4-5
Destination Bundle See Table 4-5
Next Hop Type See Table 4-6
Next Hop See Table 4-5
TDM Bytes in Packet See Table 4-9
Payload Format See Table 4-5
Far End Type See Table 4-5
OAM Connectivity See Table 4-5
Jitter Buffer See Table 4-5 0.5–180
Sensitive See Table 4-5
OOS Mode See Table 4-5