Specifications

Installation and Operation Manual Chapter 4 Configuration
IPmux-24 Ver. 1.5 Configuring IPmux-24 for Operation 4-31
 CESoPSN (CESoPSN connection mode is available for E1/T1 links operating
in framed mode)
 SAToP (SAToP connection mode is available for E1/T1 links operating in
unframed mode)
8. From the Connection menu, configure the packet-switched network type:
 UDP/IP (Bundle encapsulation is UDP/IP)
 MPLS/ETH (Bundle encapsulation is MPLS/Ethernet)
PSN Type is only available after Bundle ID has been set.
9. From the Connection menu, select Bundle connection.
The Bundle Connection menu appears (see
Figure 4-27) .
IPmux-24 only shows the relevant menu options, depending on the TDM line
type, PW type, PSN type, and transmit clock source.
Configuration>Connection>Bundle connection
TDM channel ID: 1 Bundle ID: 1
1. Destination IP address ... (0.0.0.0)
2. Next hop ... (0.0.0.0)
3. IP TOS[0 - 255] ... (0)
4. Connection status (Enable)
5. Destination bundle[1 - 8063] ... (1)
6. TDM bytes in frame(x48 bytes)[1 - 30] ... (1)
7. Payload format (V2)
8. Far end type > (E1)
9. OAM connectivity (Disable)
10. Jitter buffer [msec][2.5 - 200] ... (200)
11. Sensitive (Data)
12. OOS mode (Tx OOS)
13. VLAN tagging (Enable)
14. VLAN ID[1 - 4095] ... (1)
15. VLAN priority[0 - 7] ... (7)
>
Please select item <1 to 15>
F - Forward Bundle ID; D - Delete; ? - Help
ESC-prev.menu; !-main menu; &-exit
Figure 4-27. Bundle Connection Menu (Connection Mode=TDMoIP CE, PSN Type=UDP/IP)
10. From the Bundle Connection menu, configure the connection values according
to
Table 4-5 , Table 4-6 , Table 4-7 , Table 4-8 , Table 4-9 , Table 4-10 , Table 4-11 ,
Table 4-12 .
Note
Note