Specifications

Chapter 4 Configuration Installation and Operation Manual
4-30 Configuring IPmux-24 for Operation IPmux-24 Ver. 1.5
Parameter Function Values
Host Tagging Controls default VLAN tagging for the
pseudowire traffic
Untagged – Default VLAN tagging is
disabled. In this case the VLAN tagging
mode as well as VLAN ID and priority
values are selected per individual PW
connection.
Tagged – Default VLAN tagging is enabled
for all PW connections
Host VLAN ID Defines ID of the PW host VLAN to be
used for all PW connections, when the
Host Tagging is set to Tagged
1–4094
Host VLAN Priority Defines priority of the PW host VLAN to
be used for all PW connections, when
the Host Tagging is set to Tagged
0–7
4. Select Bundle, and select a bundle to which you intend to assign timeslots.
Keep in mind that by selecting a bundle number, you specify a TDM link
(1–4), which provides timeslots for the bundle, as illustrated above.
5. Select DS0 bundle.
The DS0 Bundle menu appears (see
Figure 4-26 ).
Configuration>Connection>DS0 bundle
TDM Channel ID: 1 Bundle ID: 1
+1 +2 +3 +4 +5 +6 +7 +8 +9 +10
TS 0 1 0 0 0 0 0 0 0 0 0
TS 10 0 0 0 0 0 0 0 0 0 0
TS 20 0 0 0 0 0 0 0 0 0 0
TS 30 0
1. Change cell [0 - 1] ... (0)
>
Please select item <1 to 1>
E – Enable all; L – Disable all
ESC-prev.menu; !-main menu; &-exit; ?-help 1 Mngr/s
Figure 4-26. DS0 Bundle Menu
6. From the DS0 Bundle, assign timeslots to the current bundle by selecting a
timeslot and choosing 1 (active) or 0 (free).
You can assign all timeslots to the current bundle at once by typing E.
You can cancel assignment of all timeslots to the current bundle at once by
typing L.
7. From the Connection menu, select the connection mode:
 TDMoIP CE (TDMoIP circuit emulation)
 HDLC (HDLC connection mode is not available for the bundles used
carrying adaptive clock)