Specifications

Installation and Operation Manual Chapter 4 Configuration
IPmux-24 Ver. 1.5 Configuring IPmux-24 for Operation 4-29
Configuration>Connection
1. PW host IP >
2. Bundle ID[1 - 511] ... (1)
3. PW type > (TDMoIP CE)
4. PSN type > (UDP/IP)
5. DS0 bundle []>
6. Bundle connection >
>
Please select item <1 to 5>
ESC-prev.menu; !-main menu; &-exit 1 Mngr/s
Figure 4-24. Connection Menu
2. From the Connection menu, select PW Host IP.
The PW Host IP menu is displayed (see
Figure 4-25 ).
3. From the PW Host IP menu, define parameters of the PW host which is going
to be used as a destination for the incoming pseudowire traffic, see
Table 4-4 .
Configuration>Connection>PW host IP
1. IP address ... (0.0.0.0)
2. IP mask ... (0.0.0.0)
3. Default next hop ... (-)
4. Pw Encapsulation >
>
Please select item <1 to 4>
ESC-prev.menu; !-main menu; &-exit 1 Mngr/s
Figure 4-25. PW Host IP Menu
Table
4-4. PW Host IP Parameters
Parameter Function Values
IP address IP address of the PW host, used for the
pseudowire traffic.
At the remote device, make sure that
the Destination IP Address value is the
same as the local PW host and vice
versa.
Valid IP address
IP Mask IP mask of the PW host, used for the
pseudowire traffic
Valid IP mask
Default Next Hop Default next hop IP address used when
no next hop IP address is defined for the
pseudowire traffic.
Valid IP address