Specifications

Installation and Operation Manual Chapter 4 Configuration
IPmux-24 Ver. 1.5 Configuring IPmux-24 for Operation 4-25
 Signaling mode:
 None
 Robbed Bit
 OOS signaling (Out-of-service signaling method. OOS signal is sent
toward the IP path when loss of signal, loss of frame, or AIS is detected
at the T1 line. The OOS signal is also sent toward the T1 line when packet
receive buffer overrun or underrun occurs.):
 Space (Code specified by the Space Signaling Code parameter is sent)
 Mark (Code specified by the Mark Signaling Code parameter is sent)
 Space MARK (space code is sent in the first 2.5 seconds, then mark
code is sent)
 Mark Space (Mark code is sent in the first 2.5 seconds, then space
code is sent)
 Mark Signaling Code:
 0–f for ESF framing
 0–3 for SF framing
 Space Signaling Code:
 0–f for ESF framing
 0–3 for SF framing
 Ethernet Network Type (Type of the Ethernet network which is used for
the pseudowire connection. Different network types are characterized by
different packet delay variation models. This parameter is relevant only
when the adaptive clock mode is selected.)
 WAN – Layer 3 network
 LAN – Layer 2 network.