Specifications

IPmux-1/1E Installation and Operation Manual Chapter 2 Installation
Installation and Setup 2-5
®
PWR RDY
ETH
FDX100MACTLINK
IPmux-1E
CONTROL
DCE
SYNC
CH1 CH2
CH4CH3
Figure 2-6. IPmux-1E Front Panel
®
PWR RDY
IPmux-1E
CONTROL
DCE
SYNC
CH1 CH2
CH4CH3
ETH2
ETH1
FDX100MACTLINK
Figure 2-7. IPmux-1E Front Panel for Two Ethernet Ports
:
FOR CONTINUED
TYPE AND RATING OF FUSE.
FIRE, REPLACE ONLY WITH SAME
PROTECTION AGAINST RISK OF
CAUTION
POWER
1
FXS
234
ETH
Figure 2-8. IPmux-1E Rear Panel (FXS Option)
Location of Connectors
Interface connections are made from the IPmux-1/1E back panel, as shown in
Figure 2-2.
• Table 2-1 lists the E1/T1 port pin assignment
• Table 2-2 lists the Ethernet port pin assignment
• Table 2-3 lists the control port pin assignment
• Table 2-4 lists the ISDN-S connector pin assignment.
• Table 2-5 lists the FXS/FXO connector pin assignment
• Table 2-6 lists the E&M connector pin assignment
• Table 2-7 lists the external clock port pin assignment.
Table 2-1. E1/T1 Port Connectors Pin Assignment
Pin Designation Direction Function
1 RD (R) Input Receive data (ring)
2 RD (T) Input Receive data (tip)
3, 6 – – FGND
4 TD (R) Output Transmit data (ring)
5 TD (T) Output Transmit data (tip)
7, 8 – N/A Not connected