Specifications

IPmux-1/1E Installation and Operation Manual Appendix E Configuration Menus
LAN Configuration (No User Port) E-37
Table E-24. Bundle Connection Parameters: CESoIP Mode (Cont.)
Parameter Possible Values Remarks
Next Hop 0.0.0.0 to
255.255.255.255
Use the next hop parameter when the Destination IP
address is not in the device subnet. In such cases the
Ethernet frame is sent to the next hop IP. If it is not
configured, the default gateway is used.
Default: 0.0.0.0 (not configured)
Note: The next hop IP must be in the device subnet.
Source UDP
1796
Ipmux-1 has a single Source UDP number, 1796,
which can not be changed
Destination UDP 1796 to 65534 Source UDP is the destination device
Jitter Buffer 3 to 127 msec Desired depth of the jitter buffer (PDVT buffer)
Default: 300 (10 x µs), i.e. 3 msec
VLAN Tagging
Yes
No
For an explanation of VLAN tagging, see Chapter 1.
VLAN ID 0 to 4095
Default: 1
VLAN Priority 0 to 7
Default: 7
E.9 LAN Configuration (No User Port)
When configuring two LANs, see Ethernet Configuration/Status (User Port).
LAN CONFIGURATION
1. Auto Negotiation Enable
2. Max Capability advertised 100baseT Full Duplex
3. Default type 100baseT Full Duplex
ESC. Exit
Select item from the menu.
Figure E-39. LAN Configuration Menu
Main Menu
↓
2. Configuration
↓
4. LAN
Configuration
Note