Specifications

IPmux-1/1E Installation and Operation Manual Appendix E Configuration Menus
IPmux-1 E1/T1 Configuration E-17
The Default Configuration returns all the Default Settings, except
for Host IP, Default Gateway, and Managers.
OR
 Type N.
The Default Configuration returns all the Default Settings,
and deletes the Host IP, Default Gateway, and Managers.
OR
 Type N to exit and return to the General Configuration menu.
2. Following this, IPmux-1/1E performs an automatic reset.
E.4 IPmux-1 E1/T1 Configuration
IPmux-1 automatically detects whether the interface is E1 or T1, and the
appropriate menu appears (see Figure E-24 and Figure E-25).
E1 Configuration
E1 CONFIGURATION
1. Channel Status Enable
2. Transmit Clock Source Adaptive
3. Loopback State Disable
4. Rx. Sensitivity -10dB
5. Line Type CRC4 enable
6. Idle Code 7E
7. Uplink Fail Alarm Behavior Cond.
8. Signaling Mode CAS enable
9. Cond. Data Pattern FF
A. Cond. CAS (ABCD) Pattern 01
ESC. Exit
Select item from the menu.
Use <Esc> key or keys <1> to <9>
Figure E-24. E1 Physical Layer Configuration Menu
When “unframed” mode is selected, the Idle Code, Signaling Mode, Cond Data
Pattern and Cond CAS Pattern fields are not present.
When CAS Disabled is selected, the Cond CAS Pattern field is not present.
Note
Main Menu
↓
2. Configuration (E1)
↓
2. E1/T1
Configuration