Specifications

Appendix E Configuration Menus IPmux-1/1E Installation and Operation Manual
E-16 General Configuration
VIEW TRANSFER STATUS
Status Transferring Data
Error No Error
Use <Esc> key to Exit
Figure E-20. View Transfer Status Window
Table E-11. View Transfer Status Parameters
Parameter Values Remarks
Status Indication
No Operation, Connecting, Transferring Data,
Ended on Time Out, Ended OK, Error
Error Message
Unavailable (no host IP), No Error, File Not Found,
Illegal TFTP Operation, Unknown Transfer ID,
Illegal PDU Size, Illegal File Mode, No Empty Connection,
No Empty UDP Port, Server Overflow
Set Default Parameters
Setting Default Parameters reconfigures the device according to default
parameters. Before overwriting the system, the warning in Figure E-21 appears
asking you to confirm your selection.
Configuration will be overwritten and system will RESET.
Continue ? (Y/N)
Figure E-21. Reset Default Warning

To overwrite the system and reconfigure it according to default settings:
1. At the prompt (Figure E-21), do one of the following:
 Type Y.
A prompt appears asking for confirmation.
Are you sure? Y/N
Figure E-22. Reset Confirmation
1. Type Y.
A second prompt appears asking for confirmation (if you have
configured the Host):
Save Host Connection? Y/N
Figure E-23. Host Confirmation
2. Perform one of the following:
 Type Y.
Main Menu
↓
2. Configuration
↓
1. General
Configuration
↓
6. Set Default
Parameters