System information

RADview-SC/TDMoIP IPmux-11 Setting Management Access Authorizations 5-1
Chapter 5
Security Management
This chapter discusses how to manage IPmux-11 security, and includes the
following sections:
• Setting Management Access Authorizations
• UNIX Users and Permissions
5.1 Setting Management Access Authorizations
The Access command allows you to enable or disable management via Telnet and
Web access. Use this command to tighten security or to enable access, when
necessary.

To enable or disable Telnet and Web access:
1. Select Options > Access…
The Access dialog box appears (
Figure 5-1).
2. Configure Telnet and Web access and click <Set>.
Figure 5-1. Access Dialog Box
Table 5-1. Telnet and Web Access Parameters
Parameter Possible Values/Remarks
Telnet Access Enable/Disable accessing the device via Telnet
Disable - No one is allowed to access the device via Telnet.
Enable - All users are allowed to access the device via Telnet.
Managers Only - Only manager stations listed in the manager's list are allowed to
access the device via Telnet.
Web Access Enable/Disable accessing the device via Web browser
Disable - No one is allowed to access the device via Web.
Enable - All users are allowed to access the device via Web.
Managers Only - Only manager stations listed in the manager's list are allowed to
access the device via Web.