System information

User's Manual Chapter 4 Configuring Typical Applications
RADview-SC/TDMoIP IPmux-11 Creating Circuits 4-17

To configure E1 parameters for the destination IPmux-14:
1. Double click on the desired IPmux-14 destination (172.17.157.11) in the
Branch Site (
Figure 4-14).
The Element Manager appears.
Figure 4-17. IPmux-14 Element Manager
2. Select CH1.
3. From the Configuration menu, select Parameters...
The Interface Parameters dialog box appears (
Figure 4-8).
4. Select the following parameters:
 Transmit Clock Source = Loopback
 Line Type = Framed-CRC.
5. Click <Set>.